Examination of surface porosity of current pulp capping materials by micro-computed tomography (micro-CT) method.

When dental pulp is exposed, it must be covered with a biocompatible material to form reparative dentine. The material used, besides being biocompatible, should have an ideal surface structure for the attachment, proliferation and differentiation of dental pulp stem cells. This study aimed to evaluate the porosity of the microstructures of four pulp capping materials using micro-computed tomography (micro-CT). Biodentine, Bioaggregate, TheraCal and Dycal materials were prepared according to the manufacturer's instructions using 2 × 9 mm Teflon molds. A total of 60 samples, 15 in each group, were scanned using micro-CT. Open and closed pores and the total porosity of the microstructures of the materials were assessed. The findings obtained from the study were analyzed via the Kruskal-Wallis test followed by the Mann-Whitney U test. The porosity of Bioaggregate was significantly higher than that of Biodentine, Dycal and TheraCal in all porosity values. While Biodentine did not show a statistically significant difference in open and total porosity values from either TheraCal or Dycal, closed porosity values of Dycal were significantly higher than those of Biodentine and TheraCal. Because of the affinity of cells to porous surfaces, the pulp capping materials' microstructure may affect the pulp capping treatment's success. From this perspective, the use of Bioaggregate in direct pulp capping may increase the success of treatment.

Pulpotomy versus pulpectomy in carious vital pulp exposure in primary incisors: a randomized controlled trial.

BACKGROUND: Pulpotomy as a minimally invasive pulp therapy technique is the treatment of choice for carious pulp exposures, however many pediatric dentists perform pulpectomies in vital primary incisors. The aim of this split mouth randomized controlled study was to compare formocresol pulpotomy and zinc-oxide and eugenol pulpectomy in the treatment of vital pulp exposure in primary incisors. METHODS: Contralateral pairs of incisors were randomly assigned to receive pulpotomy or pulpectomy in children aging from 18 to 66 months old and were followed up for 12 months. RESULTS: 39 pairs of incisors were included. Clinical and radiographical success rates showed no statistical significant difference (p = 1, p = 0.8 respectively). Relative risk measures for clinical success rates (RR = 1.03, 95%CI 0.87 to 1.23) and for radiographic success rates (RR = 1.03, 95%CI 0.83 to 1.29) with CIs including number one showing no difference between the two groups. The Survival rate using Kaplan-Meier survival analysis score showed 82% for pulpotomy and 74% for pulpectomy at 12 months (P = 0.2). CONCLUSIONS: Both pulpotomy and pulpectomy techniques can be used successfully in the treatment of carious vital pulp exposure in primary incisors. TRIAL REGISTRATION: The trial was retrospectively registered in Clinicaltrials .gov with this identifier NCT05589025 on 21/10/2022.

An animal study on the effectiveness of platelet-rich plasma as a direct pulp capping agent.

Direct pulp capping (DPC) is a conservative approach for preserving tooth vitality without requiring more invasive procedures by enhancing pulp healing and mineralized tissue barrier formation. We investigated the effectiveness of Platelet Rich Plasma (PRP) vs. Mineral Trioxide Aggregate (MTA) as a DPC agent. Forty-two teeth from three mongrel dogs were divided into two equal groups. After three months, the animals were sacrificed to evaluate teeth radiographically using cone-beam computerized tomography, histopathologically, and real-time PCR for dentin sialophosphoprotein (DSPP), matrix extracellular phosphoglycoprotein (MEPE), and nestin (NES) mRNA expression. Radiographically, hard tissue formation was evident in both groups without significant differences (p = 0.440). Histopathologic findings confirmed the dentin bridge formation in both groups; however, such mineralized tissues were homogenous without cellular inclusions in the PRP group, while was osteodentin type in the MTA group. There was no significant difference in dentin bridge thickness between the PRP-capped and MTA-capped teeth (p = 0.732). The PRP group had significantly higher DSPP, MEPE, and NES mRNA gene expression than the MTA group (p < 0.05). In conclusion, PRP enables mineralized tissue formation following DPC similar to MTA, and could generate better cellular dentinogenic responses and restore dentin with homogenous architecture than MTA, making PRP a promising alternative DPC agent.

Histological evaluation of the regenerative potential of a novel photocrosslinkable gelatin-treated dentin matrix hydrogel in direct pulp capping: an animal study.

BACKGROUND: To assess histologically the success of the pulp capping approach performed in traumatically exposed dogs' teeth using a novel injectable gelatin-treated dentin matrix light cured hydrogel (LCG-TDM) compared with LCG, MTA and TheraCal LC. METHODS: Sixty-four dogs' teeth were divided into two groups (each including 32 teeth) based on the post-treatment evaluation period: group I: 2 weeks and group II: 8 weeks. Each group was further subdivided according to the pulp capping material into four subgroups (n = 8), with subgroup A (light-cured gelatin hydrogel) as the control subgroup, subgroup B (LCG-TDM), subgroup C (TheraCal LC), and subgroup D (MTA). Pulps were mechanically exposed in the middle of the cavity floor and capped with different materials. An assessment of periapical response was performed preoperatively and at 8 weeks. After 2 and 8-week intervals, the dogs were sacrificed, and the teeth were stained with hematoxylin-eosin and graded by using a histologic scoring system. Statistical analysis was performed using the chi-square and Kruskal-Wallis tests (p = 0.05). RESULTS: All subgroups showed mild inflammation with normal pulp tissue at 2 weeks with no significant differences between subgroups (p ≤ 0.05), except for the TheraCal LC subgroup, which exhibited moderate inflammation (62.5%). Absence of a complete calcified bridge was reported in all subgroups at 2 weeks, while at 8 weeks, the majority of samples in the LCG-TDM and MTA-Angelus subgroups showed complete dentin bridge formation and absence of inflammatory pulp response with no significant differences between them (p ≤ 0.05). However, the formed dentin in the LCG-TDM group was significantly thicker, with layers of ordered odontoblasts identified to create a homogeneous tubular structure and numerous dentinal tubule lines suggesting a favourable trend towards dentin regeneration. TheraCal LC samples revealed a reasonably thick dentin bridge with moderate inflammation (50%) and LCG showed heavily fibrous tissue infiltrates with areas of degenerated pulp with no signs of hard tissue formation. CONCLUSIONS: LCG-TDM, as an extracellular matrix-based material, has the potential to regenerate dentin and preserve pulp vitality, making it a viable natural alternative to silicate-based cements for healing in vivo dentin defects in direct pulp-capping procedures.

4-Year Pulp Survival in a Randomized Trial on Direct Pulp Capping.

INTRODUCTION: This study aimed to assess pulp survival in a randomized trial on pulp lavage in adult nonpainful posterior teeth with carious pulp exposure. The treatment included complete caries excavation, direct pulp capping with mineral trioxide aggregate, and immediate restoration with composite resin. METHODS: Fluid was collected from the pulp wound to assess matrix metalloproteinase-9 (MMP-9) and total protein values. Before pulp capping, cavities were randomly (block randomization, n = 48) washed with a physiological saline or a sodium hypochlorite solution (2.5% NaOCl). Treatment outcome was assessed clinically (cold test) and radiographically after at least 1 year and again after at least 3 years. Painful failures were differentiated from nonpainful failures. Pulp survival was estimated using the Kaplan-Meier method including 95% confidence intervals (CIs) up to 1500 days. RESULTS: From the 96 patients originally enrolled, 73 individuals could be followed continuously. The clinical observations indicated a beneficial and sustained effect of pulp lavage with 2.5% NaOCl over a control treatment with physiological saline solution on estimated pulp survival 1500 days postintervention, with 7% (95% CI, 1%-40%) in the saline group versus 55% (95% CI, 30%-100%) in the NaOCl group. High MMP-9/total protein values in pulpal fluid collected from the exposed site indicated early and painful treatment failures yet were not associated with failures that occurred more than 250 days after intervention. CONCLUSIONS: The low 4-year success rates reported here challenge the concept of direct pulp capping in the cases that were included. NaOCl lavage did not only increase the survival of affected pulps substantially but also particularly diminished painful failures (33% in the NaOCl group vs 62% in the saline group). The lack of the predictive value of MMP-9 assessments beyond early treatment failures points to inflammatory states of the pulp tissue under deep caries, which are not related to neutrophil infiltration.

Regenerative potential of a novel aloe vera modified tricalcium silicate cement as a pulp capping material: An animal study.

This study compared the histologic response of a pulp capping material Matreva MTA modified with different concentrations of aloe vera (AV) solutions to Biodentine cement. Ninety dogs' teeth were included and categorized according to the capping material into five groups (18 teeth each); Group I (Biodentine), group II (Matreva MTA), group III (Matreva MTA 10% AV), group IV (Matreva MTA 20% AV) and group V (Matreva MTA 30% AV). The histopathological findings were recorded at 2, 4, and 8 weeks. Matreva MTA and Biodentine groups showed the highest inflammatory cell count compared to the AV-modified Matreva MTA groups at 2- and 4-week intervals (p>0.05). Moreover, the AV-modified Matreva MTA and Biodentine groups showed higher dentin bridge thickness compared to unmodified Matreva MTA at different follow-up periods (p<0.05). AV can significantly enhance the in vivo bioactivity of Matreva MTA, inducing mild inflammation and good dentine bridge formation comparable to Biodentine.

THREE-YEAR OUTCOME OF DIODE LASER PULPOTOMY OF PRIMARY MOLARS USING THREE PULP CAPPING AGENTS: A SPLIT-MOUTH RANDOMIZED CLINICAL TRIAL.

OBJECTIVES: Pulpotomy is the most commonly performed treatment for asymptomatic primary molars with exposed dental pulp. This study aimed to assess the clinical /radiographic success of diode laser pulpotomy with mineral trioxide aggregate (MTA), calcium hydroxide (CH), and calcium-enriched mixture (CEM) cement as pulp capping agents. METHODS: This split-mouth randomized clinical trial was conducted initially on 34 children aged 3-8 years but 4 patients left the study before the first follow-up visit and the study was accomplished and analyzed with 30 cases. The patients had at least 3 first/second molars with deep caries that in radiographic evaluation revealed that they required pulpotomy. Following pulpotomy, the pulp stump was irradiated with diode laser (noncontact mode, 632 nm, 30 mW power) as photobiomodulation mode. Pulp tissue was then capped with MTA, CH, or CEM cement (n = 30 in each group). Reinforced zinc oxide eugenol was applied over the capping agent, and the teeth were restored with stainless steel crowns. Teeth were clinically/radiographically assessed at 6, 12, 18, and 36 months, after treatment. Data were analyzed by Cochran and McNemar tests. RESULTS: All 30 patients showed up for clinical/radiographic follow-ups for up to 36 months. Regarding clinical outcomes, the 6-, 12-, 18-, and 36-month success rates of all experimental groups were nearly similar with no significant difference (p > .05). Regarding radiographic outcomes, the 6-month success rates were similar among the groups (p > .05); however, the 12-, 18-, and 36-month outcomes of CEM and MTA groups were similar but significantly superior to that of CH group (p < .05). CONCLUSION: Diode laser irradiation and subsequent capping of pulp tissue with MTA or CEM cement can be employed for pulpotomy of primary molars.

Early Inflammatory Response of Dental Pulp in Response to Biodentin and Mineral Trioxide Aggregate as Pulp-capping Agents.

This study was carried out to observe immediate inflammatory response of Human Dental Pulp capped with Biodentin and Mineral Trioxide Aggregate (MTA). This prospective clinical study was carried out in the Department of Conservative Dentistry and Endodontics together with the Department of Orthodontia, Bangabandhu Sheikh Mujib Medical University (BSMMU), Bangladesh from 2016 to 2018. A total number of eighty (80) permanent premolars teeth planned to be extracted for orthodontic alignment of occlusion were used as study sample. Those teeth were divided into two groups; Group A and Group B, having 40 teeth in each (n=40). An occlusal exposure of approximately 1.5mm in diameter was made. Then in -group A, exposed pulp were capped with 2-mm-thick layer of sterile Biodentin (Septodont) and in-group B with ProRoot White MTA (Dentsply). After pulp capping with the experimental material in respective group, cavities in all teeth were restored with glass ionomer cement. After 24 hours the teeth were extracted, fixed in 10% buffered formalin solution, then decalcified by 10.0% nitric acid and embedded in paraffin. Now 2 to 3-micron-thick serial sections were made in the linguo-buccal plane and finally stained with hematoxylin-eosin. Now pulpal inflammation in respect of type, intensity and extension, were determined by using a predetermined evaluation criterion under an optical microscope at 40× magnifications. Statistical differences among the experimental groups were analyzed by Descriptive analysis (Cross Tabulation) (p<0.05). Histologically both the tested materials produced immediate pulpal tissue reaction. 'Biodentin' found to be most immediate pulpal tissue reactive (reactive in 100% cases), Whereas, MTA produced immediate tissue reaction only in 50.0% cases. Immediate pulpal inflammatory reaction in response to tested material found to be statistically significant different between 'Biodentin' and 'MTA' (p=0.001). According to present study Biodentin is found to be more immediate pulpal tissue reactive than MTA when used as a pulp capping material.

Photocrosslinkable gelatin-treated dentin matrix hydrogel as a novel pulp capping agent for dentin regeneration: I. synthesis, characterizations and grafting optimization.

BACKGROUND: In recent years, treated dentin matrix (TDM) has been introduced as a bioactive hydrogel for dentin regeneration in DPC. However, no study has introduced TDM as a photocrosslinkable hydrogel with a natural photoinitiating system. Therefore, the present study aimed to explore the synthesis, characterizations and grafting optimization of injectable gelatin- glycidyl methacrylate (GMA)/TDM hydrogels as a novel photocrosslinkable pulp capping agent for dentin regeneration. METHODS: G-GMA/TDM hydrogel was photocrosslinked using a new two-component photoinitiating system composed of riboflavin as a photoinitiator under visible light and glycine as a first time coinitiator with riboflavin. The grafting reaction conditions of G-GMA/TDM e.g. GMA concentration and reaction time were optimized. The kinetic parameters e.g. grafting efficiency (GE) and grafting percentage (GP%) were calculated to optimize the grafting reaction, while yield (%) was determined to monitor the formation of the hydrogel. Moreover, G-GMA/TDM hydrogels were characterized by swelling ratio, degradation degree, and cytotoxicity. The instrumental characterizations e.g. FTIR, 1H-NMR, SEM and TGA, were investigated for verifying the grafting reaction. Statistical analysis was performed using F test (ANOVA) and Post Hoc Test (P = 0.05). RESULTS: The grafting reaction dramatically increased with an increase of both GMA concentration and reaction time. It was realized that the swelling degree and degradation rate of G-GMA/TDM hydrogels were significantly reduced by increasing the GMA concentration and prolonging the reaction time. When compared to the safe low and moderate GMA content hydrogels (0.048, 0.097 M) and shorter reaction times (6, 12, 24 h), G-GMA/TDM with high GMA contents (0.195, 0.391 M) and a prolonged reaction time (48 h) demonstrated cytotoxic effects against cells using the MTT assay. Also, the morphological surface of G-GMA/TDM freeze-dried gels was found more compacted, smooth and uniform due to the grafting process. Significant thermal stability was noticed due to the grafting reaction of G-GMA/TDM throughout the TGA results. CONCLUSIONS: G-GMA/TDM composite hydrogel formed by the riboflavin/glycine photoinitiating system is a potential bioactive and biocompatible system for in-situ crosslinking the activated-light pulp capping agent for dentin regeneration.

Comparative evaluation of treatment outcome of partial pulpotomy using different agents in permanent teeth-a randomized controlled trial.

AIM: To compare and evaluate the clinical and radiographic performance, post-operative pain, and anti-inflammatory intake after partial pulpotomy (PP) with calcium hydroxide (CH), mineral trioxide aggregate (MTA), Biodentine (BD), and Emdogain (EMD) as pulp capping agents in mature permanent molars with definitive diagnosis of reversible pulpitis. MATERIALS AND METHODS: As part of this prospective, randomized clinical trial with four parallel arms (CTRI Registration No.: CTRI/2020/11/029329 dated 24/11/2020), hundred and ten permanent molars with a clinical diagnosis of reversible pulpitis and normal apical tissues, from patients between the ages of 15 and 45 years, were recruited and randomly assigned to four groups-CH, MTA, BD, and EMD. Operative procedure was performed under local anesthesia and dental dam isolation. After carious pulpal exposure, 2 mm of superficially inflamed coronal pulp tissue was amputated and either of the four pulp capping materials was placed. The outcome assessment was carried out at 1, 3, 6, and 12 month(s) and was categorized as success (asymptomatic patients with PAI score = 1) or failure (symptomatic patients or PAI score > 1). RESULTS: There was a significant difference in post-operative pain and anti-inflammatory medication intake after partial pulpotomy with Emdogain vis-à-vis other three capping agents. No difference in both clinical and radiographic performances was observed among the four capping agents. CONCLUSION: Partial pulpotomy when performed following evidence-based guidelines results in high success rates regardless of capping agent employed. EMD can be considered a valid and suitable pulp capping agent in PP. CLINICAL RELEVANCE: Meticulous examination and removal of superficially inflamed pulp under magnification and complete asepsis lead to successful pulpal healing regardless of capping agent employed.

Multivariate prognostic analysis of direct pulp capping using a bioceramic material in mature permanent teeth with carious pulp exposure: a retrospective cohort study.

OBJECTIVES: On the basis of a large sample size and a long follow-up period, the objectives of this study were to evaluate the outcomes of direct pulp capping (DPC) in mature permanent teeth with carious pulp exposure using a kind of bioaggregate putty (BP) which commercially named iRoot BP Plus (Innovative Bioceramix, Inc., Vancouver, Canada) and to analyze the potential prognostic factors. MATERIALS AND METHODS: The design of this research was retrospective regarding treatment procedures and prospective regarding the assessment of outcomes. The preoperative diagnosis of the teeth was either normal pulp or reversible pulpitis. Results were assessed based on clinical and radiographic examinations with at least 12 months of follow-up after DPC. No symptoms or signs, a positive response to electric pulp testing, a normal response to cold pulp testing and radiographs showing no abnormalities were considered to indicate success. Kaplan-Meier survival analysis was used to calculate the cumulative survival of teeth after DPC. Univariate and multivariate Cox proportional hazard regressions were used to analyze potential prognostic factors. RESULTS: Three hundred thirty-four patients, including a total of 354 teeth, were available for the final clinical examination. The follow-up period ranged from 12 to 85 months, with an average of 27.0 ± 0.8 months. The total success rate was 85% (302/354), and the cumulative survival rates at 1, 2, 3, 4, and 5 years were 92%, 87%, 83%, 76%, and 72%, respectively. Univariate analysis indicated a significantly increased risk of failure in patients aged above 40 years and those treated by resident operators (P ≤ 0.01), with hazard ratios of 2.18 and 2.27, respectively. CONCLUSIONS: Under appropriate indication selection and treatment procedures, long-term success is possible in mature permanent teeth with carious pulp exposure by DPC using iRoot BP Plus. Patient age and operator experience are potential prognostic factors. CLINICAL RELEVANCE: Clinical data on iRoot BP Plus as a pulp capping medicament in mature permanent teeth with carious pulp exposure is lacking. This study indicated the efficacy of BP in DPC. Younger patient and sophisticated operator are beneficial for the outcome of DPC.

Synthesis and characterization of a dental cement based on bioactive glass/zinc oxide modified with organic resin as a novel pulp capping agent.

This study aimed to synthesize and characterize a novel dental pulp capping cement containing bioactive glass (BG)/zinc oxide modified with an organic resin. BG (45S5) with or without ZnO (Zn) and hemaphosphate (HP) combined with a liquid consisting of polyacrylic and itaconic acids (AA) were synthesized and the structural, physical, and mechanical properties were assessed. Hydroxyapatite formation was evaluated by immersion in simulated body fluid. Biological analysis including methyl thiazolyl tetrazolium assay, alizarin red staining, alkaline phosphatase (ALP) activity, and gene expression of odontogenic markers were performed to evaluate the cytotoxic effect and biomineralization potential of the cements on human dental pulp stem cells (hDPSCs). A commercial mineral trioxide aggregate (MTA) served as control. The highest compressive strength value and the shortest setting time were belonged to the BG + HP + AA and BG + AA groups, respectively. The shear bond strength to dentin was the highest for the BG + HP + AA cement. Scanning electron microscope showed only scarce deposits of calcium phosphate formation on the surface of the synthesized cements. BG + HP + AA and BG + HP + Zn + AA groups had significantly lower cytotoxicity than MTA. The mineralization potential of hDPSCs after stimulation by the novel cements increased. Quantitative reverse-transcription-polymerase chain reaction showed higher odontogenic marker expression in hDPSCs exposed to the BG + HP + Zn + AA cement compared to other synthesized cements, although it was higher in MTA group. Based on the obtained results, the novel synthesized cements can be used as appropriate capping agents in the treatment of dental pulp.

Inflammatory response and odontogenic differentiation of inflamed dental pulp treated with different pulp capping materials: An in vivo study.

AIM: Previous studies have evaluated the pulpal responses to calcium silicate cements (CSCs) on normal dental pulp, but investigations on the effects of CSCs on inflamed pulp are limited. This study aimed to test the inflammatory response and odontogenic differentiation of inflamed rat dental pulp after direct pulp capping with CSCs. METHODOLOGY: Wistar rat molars pulps were exposed for 48 h to induce inflammation and then capped with ProRoot MTA (Dentsply), Biodentine (Septodont), RetroMTA (Bio MTA) and Dycal (Dentsply Caulk). The degree of pulpal inflammation and hard tissue formation was evaluated by histological analysis. Immunofluorescence staining for interleukin (IL)-6, osteocalcin (OCN) and runt-related transcription factor 2 (RUNX2) was also performed. RESULTS: After 4 weeks, complete recovery from inflammation was evident in 22%, 37.5%, 10% and none of the ProRoot MTA, Biodentine, RetroMTA and Dycal samples, respectively. Heavy hard tissue deposition as a continuous hard tissue bridge was observed in 77.8%, 75%, 70% and 60% of the ProRoot MTA, Biodentine, RetroMTA and Dycal samples, respectively. IL-6, OCN and RUNX2 were detected in all materials, mainly adjacent to areas of inflammation and reparative dentine formation. At one, two and 4 weeks, significant differences were not observed between the inflammation and hard tissue formation scores of the four material groups (p > .05). CONCLUSIONS: In this study, pulpal inflammation was still present in most specimens at 4 weeks after pulp capping and a significant number of samples showed incomplete and discontinuous dentine bridge formation. The results of this study suggest that initial inflammatory conditions of the pulp may risk the prognosis of teeth treated with CSCs.

Impact of corticosteroid administration on the response of exposed dental pulp to capping with bioactive cements-experimental study on mongrel dogs.

BACKGROUND: Corticosteroids are commonly used as a treatment for a variety of pathological conditions, however, systemic corticosteroid administration has adverse effects including impaired immune response and wound healing. Such complications may affect pulp healing after direct pulp capping. The current study evaluated the influence of corticosteroids on the healing ability of exposed dogs' dental pulps after direct pulp capping (DPC) with bioactive materials. METHODS: Ten healthy male dogs were assigned randomly into two groups, 5 dogs each: group I represent the control group which did not receive any medication, and group II was given corticosteroid for 45 days before DPC and till the dogs were euthanized (n = 75 teeth for each group). Following mechanical exposure, the pulps were randomly capped with either Ca(OH)2, MTA, or Biodentine. The pulpal tissues' reaction to the capping materials was evaluated 65 days postoperatively according to the following parameters: calcific bridge formation, pulpal inflammation, pulp necrosis, and bacterial infiltration. RESULTS: The corticosteroid-treated group revealed no significant difference compared to the control group concerning the pulp healing response (P > 0.05). Both Biodentine and MTA-treated specimens revealed significant differences with Ca(OH)2-treated specimens (P < 0.05) which displayed a superior positive effect of both MTA and Biodentine to Ca(OH)2 regarding all the parameters. CONCLUSIONS: Direct pulp capping technique whenever indicated in subjects treated with corticosteroid immunosuppressive drugs like prednisone performed well in aseptic conditions especially when capped with bioactive materials.

Factors Affecting the Decision-making of Direct Pulp Capping Procedures among Dental Practitioners: A Multinational Survey from 16 Countries with Meta-analysis.

INTRODUCTION: Direct pulp capping (DPC) procedures require the placement of a bioactive material over an exposure site without selective pulp tissue removal. This web-based multicentered survey had 3 purposes: (1) to investigate the factors that affect clinicians' decisions in DPC cases, (2) to determine which method of caries removal is preferred, and (3) to evaluate the preferred capping material for DPC. METHODS: The questionnaire comprised 3 sections. The first part comprised questions regarding demographic features. The second part comprised questions on how treatment plans change according to factors such as nature, location, number and size of the pulp exposure, and patients' age. The third part composed of questions on the common materials and techniques used in DPC. To estimate the effect size, the risk ratio (RR) and 95% confidence interval (CI) were calculated using a meta-analysis software. RESULTS: A tendency toward more invasive treatment was observed for the clinical scenario with carious-exposed pulp (RR = 2.86, 95% CI: 2.46, 2.32; P < .001) as opposed to the clinical scenario with 2 pulp exposures (RR = 1.38, 95% CI: 1.24, 1.53; P < .001). Complete caries removal was significantly preferred to selective caries removal (RR = 4.59, 95% CI: 3.70, 5.69; P < .001). Among the capping materials, calcium silicate-based materials were preferred over calcium hydroxide-based materials (RR = 0.58, 95% CI: 0.44, 0.76; P < .05). CONCLUSIONS: While carious-exposed pulp is the most important factor in clinical decisions regarding DPC, the number of exposures has the least impact. Overall, complete caries removal was preferred over selective caries removal. In addition, the use of calcium silicate-based materials appears to have replaced calcium hydroxide-based materials.

Biodegradation of an injectable treated dentin matrix hydrogel as a novel pulp capping agent for dentin regeneration.

BACKGROUND: A novel injectable mixture termed treated dentin matrix hydrogel (TDMH) has been introduced for restoring dentin defect in DPC. However, no study evaluated its physiological biodegradation. Therefore, the present study aimed to assess scaffold homogeneity, mechanical properties and biodegradability in vitro and in vivo and the regenerated dentin induced by TDMH as a novel pulp capping agent in human permanent teeth. METHODS: Three TDMH discs were weighted, and dry/wet ratios were calculated in four slices from each disc to evaluate homogeneity. Hydrogel discs were also analyzed in triplicate to measure the compressive strength using a universal testing machine. The in vitro degradation behavior of hydrogel in PBS at 37 °C for 2 months was also investigated by monitoring the percent weight change. Moreover, 20 intact fully erupted premolars were included for assessment of TDMH in vivo biodegradation when used as a novel injectable pulp capping agent. The capped teeth were divided into four equal groups according to extraction interval after 2-, 8-, 12- and 16-weeks, stained with hematoxylin-eosin for histological and histomorphometric evaluation. Statistical analysis was performed using F test (ANOVA) and post hoc test (p = 0.05). RESULTS: No statistical differences among hydrogel slices were detected with (p = 0.192) according to homogeneity. TDMH compression modulus was (30.45 ± 1.11 kPa). Hydrogel retained its shape well up to 4 weeks and after 8 weeks completely degraded. Histological analysis after 16 weeks showed a significant reduction in TDMH area and a simultaneous significant increase in the new dentin area. The mean values of TDMH were 58.8% ± 5.9 and 9.8% ± 3.3 at 2 and 16 weeks, while the new dentin occupied 9.5% ± 2.8 at 2 weeks and 82.9% ± 3.8 at 16 weeks. CONCLUSIONS: TDMH was homogenous and exhibited significant stability and almost completely recovered after excessive compression. TDMH generally maintained their bulk geometry throughout 7 weeks. The in vivo response to TDMH was characterized by extensive degradation of the hydrogel and dentin matrix particles and abundant formation of new dentin. The degradation rate of TDMH matched the rate of new dentin formation. TRIAL REGISTRATION: PACTR201901866476410: 30/1/2019.

3D-printed microgels supplemented with dentin matrix molecules as a novel biomaterial for direct pulp capping.

OBJECTIVES: To develop a 3D-printed, microparticulate hydrogel supplemented with dentin matrix molecules (DMM) as a novel regenerative strategy for dental pulp capping. MATERIALS AND METHODS: Gelatin methacryloyl microgels (7% w/v) mixed with varying concentrations of DMM were printed using a digital light projection 3D printer and lyophilized for 2 days. The release profile of the DMM-loaded microgels was measured using a bicinchoninic acid assay. Next, dental pulp exposure defects were created in maxillary first molars of Wistar rats. The exposures were randomly capped with (1) inert material - negative control, (2) microgels, (3) microgels + DMM 500 µg/ml, (4) microgels + DMM 1000 µg/ml, (5) microgels + platelet-derived growth factor (PDGF 10 ng/ml), or (6) MTA (n = 15/group). After 4 weeks, animals were euthanized, and treated molars were harvested and then processed to evaluate hard tissue deposition, pulp tissue organization, and blood vessel density. RESULTS: All the specimens from groups treated with microgel + 500 µg/ml, microgel + 1000 µg/ml, microgel + PDGF, and MTA showed the formation of organized pulp tissue, tertiary dentin, newly formed tubular and atubular dentin, and new blood vessel formation. Dentin bridge formation was greater and pulp necrosis was less in the microgel + DMM groups compared to MTA. CONCLUSIONS: The 3D-printed photocurable microgels doped with DMM exhibited favorable cellular and inflammatory pulp responses, and significantly more tertiary dentin deposition. CLINICAL RELEVANCE: 3D-printed microgel with DMM is a promising biomaterial for dentin and dental pulp regeneration in pulp capping procedures.

Light-cured calcium hydroxide cements release of calcium ions using argon based induction coupled mass spectroscopy - an in vitro study.

Calcium ion-releasing ability of different calcium hydroxide-based pulp capping materials was comparatively evaluated in this study. Different brands of cements were taken from different manufacturers and categorized into three groups. Three different brands of Ca(OH)2 cements (Dycal, TheraCal, and Cal LC) were taken prepared by mixing and curing the cements as per the manufacturer's instructions. Consequently, ion release was measured after 7, 14, and 21 days by argon-based induction coupled plasma mass spectroscopy test. Within the limitations of this study, light-cured Ca(OH)2 cements released a higher amount of calcium ions compared with self-cured Ca(OH)2 cements. Theracal was found to be the highest light-cured calcium ion releasing materials throughout the period of 21 days. In conclusion, further clinical studies are warranted to substantiate the findings of this study.

A comparative histological study of the effect of TheraCal LC and biodentine on direct pulp capping in rabbits: an experimental study.

OBJECTIVES: This study histologically compared the effect of TheraCal LC and biodentine on direct pulp capping using a rabbit model. MATERIALS AND METHODS: A direct pulp capping procedure was performed on 40 mandibular central incisors of 20 healthy, male New Zealand white rabbits. TheraCal LC and biodentine were applied to exposed pulp and 10 randomly selected rabbits were euthanized after the first and second week. Incisors were extracted and prepared for histological processing and examination to check the dentine bridge thickness, continuity, and extent of pulp inflammation. A blinded data analysis was performed, and groups were compared using a Wilcoxon signed-rank test while changes across time within each group were assessed using the Mann-Whitney U test. RESULTS: When comparing the dentine bridge thickness, biodentine showed a significantly thicker dentine bridge in the first and second week (mean 28.16 µm, 33.66 µm), while TheraCal LC showed a dentine bridge in the second week only (mean 15.93 µm). Regarding dentine bridge continuity, biodentine showed a significantly better dentine bridge in the first week. Additionally, there was no difference in the second week. Furthermore, there was no statistically significant difference between each of the materials regarding the extent of inflammation. CONCLUSIONS: Biodentine in vivo showed better results concerning thickness and continuity of the dentine bridge after direct pulp capping in rabbit incisors. Both biodentine and TheraCal LC had a similar inflammatory effect on the pulp. CLINICAL RELEVANCE: Biodentine is more successful as a direct pulp capping material compared to TheraCal LC.

Outcome of Direct Pulp Capping Using Calcium Hydroxide: A Long-term Retrospective Study.

INTRODUCTION: This retrospective study evaluated the long-term outcome of direct pulp capping in mature teeth using specific case selection and treatment procedures. METHODS: Teeth with pulp exposure due to advanced caries and clinical diagnosis of reversible pulpitis were treated by direct pulp capping. Treatments were conducted over a period of 15 years by a single operator. Under magnification, caries was completely removed, the exposed pulp examined, and capped with either pure calcium hydroxide or a calcium hydroxide-based cement. The cavity was restored and the long-term outcome evaluated from 1 to >35 years. Teeth that were asymptomatic, responded to sensibility pulp tests within normal limits, and showed no radiographic periapical changes were categorized as success. Teeth with no response to pulp tests and/or showing radiographic evidence of apical periodontitis were classified as failures. The effects of independent variables (sex, age, symptoms, number and size of pulp exposures, bleeding time, capping material, bases used over the capping material, and final coronal restoration) on the outcome were evaluated. RESULTS: In general, 225 teeth from 148 patients were available for follow-up examination in at least one of the evaluated periods. The success rate of the direct pulp capping procedure was 100%, 95%, 95%, 86%, and 89% at 1-, 5-, 10-, 20-, and 35-year follow-up examination, respectively. The main variable significantly affecting the treatment outcome in all follow-up periods was the quality/presence of coronal restoration (P < .001). Other isolated variables associated with the outcome included the size and number of pulp exposures at the 20-year follow-up, and the exposure size, capping material, and restoration type at the 35-year follow-up. Multiple regression analysis confirmed the results for exposure size (P < .05), and disclosed a higher proportion of failures at 5 years when varnish was used as the base. CONCLUSIONS: A very high success rate of the direct pulp capping with calcium hydroxide was observed, especially in the first 10 years following treatment. The main variable influencing the outcome was the quality of the coronal restoration.